Device for Measuring Intensity and Accumulation of Impacts for Sports Practice
DOI:
https://doi.org/10.5020/23180730.2022.12140Abstract
Sports activities practiced by amateur or professional athletes are always subject to impacts and may, over time, or with intensity, cause injuries. Some sports are more susceptible to impacts, especially in lower limbs. Repetitive movements, of any nature, favor the appearance of injuries caused by impact that can keep athletes away from their activities for long periods, greatly impairing their performance and physical conditioning. This article aims to present a micro-controlled portable device of low cost and low energy consumption, capable of measuring and storing environmental parameters and impact data, referring to reaction forces of ground with the lower limbs of athletes during sports practices. The research highlights the importance that obtaining impact information during sports practice can prevent injuries or their worsening. Collection parameters is relevant to determine the ideal training condition, and execution strategies in sports activities. Finally, there is the prior analysis of the device’s behavior and the planning of new research stages.
Downloads
References
PIUCCO, T.; SANTOS, S. G.; PACHECO, A. G.; SOUZA, P. D.; REIS, D. C. Magnitude dos Impactos Durante as Aterrissagens no Basquete Associado com Lesões nos Membros Inferiores. Universidade de Santa Catarina, pp.1-7, 2007.
SANTOS, S. G.; DETANICO, D.; REIS, D. C. Magnitudes de Impacto e Cinemática dos Membros Inferiores no Arremesso em Suspensão no Handebol. Revista Brasileira Cineantropometria e Desempenho Humano, v.11(03), pp.326-333, 2009.
SANTOS, S. G.; PIUCCO, T.; REIS, D. C. Fatores que Interferem nas Lesões de Atletas Amadores de Voleibol. Revista Brasileira de Cineantropometria Desempenho Humano, v.9(2), pp.189-195, 2007.
ALMERON, M. M.; PACHECO, A. M.; PACHECO, I. Relação entre Fatores de Risco Intrínsecos e Extrínsecos e a Prevalência de Lesões em Membros Inferiores em Atletas de Basquetebol e Voleibol. Revista Ciência & Saúde, v.2(02), pp.58-65, 2009.
FONSECA, S. T.; OCARINO, J. M.; SILVA, P. L. P.; BRICIO, R. S.; COSTA, C. A.; WANNER, L. L. Caracterização da Performance Muscular em Atletas Profissionais de Futebol. Revista Brasileira de Medicina do Esporte, v.13(03), pp.143-147, 2007.
OLIVEIRA, L. G.; VELLADO, D. M.; TARTARUGA, L.; GERTZ, L. C.; LOSS, J. F. Plataforma de Força Desenvolvida para Coleta de Dados no Remo Ergômetro. VIII Congresso Brasileiro de Biomecânica. João Pessoa, 18-22 junho, pp.397-400, 2005.
SILVA, A. S. M. Wearable Sensors Systems for Human Motion Analysis Sports and Rehabilitation. Dissertação de Mestrado Universidade do Porto, 2014. 223p
HASE, K.; ANDREWS B. J.; ZAVATSKY, A. B.; HALLIDAY, S. E Biomechanics of Rowing (I. A Model Analysis of Musculo-Skeletal Loads in Rowing for Fitness). JSME International Journal. v.45(04), pp.1073-1081, 2002.
ISHIDA, J. C.; TURI, B. C.; PEREIRA-DA-SILVA, M.; AMARAL, S. L. Presença de Fatores de Risco de Doenças Cardiovasculares e de Lesões em Praticantes de Corrida de Rua. Revista Brasileira de Educação Física e Esporte, v.27(1), pp.55-65, 2013.
MANN, L.; KLEINPAUL, J. F.; TEIXEIRA, C. S.; MOTA, C. B. Modalidades Esportivas: Impacto, Lesões e a Força de Reação do Solo. Revista da Educação Física de Maringá, v.21(03), pp.553-562, 2010.
HIRAI, K.; HIROSE, M.; HAIKAWA, Y.; TAKENAKA, T. The Development of Honda Humanoid Robot. IEEE International Conference on Robotics and Automation, Leuven, May, pp.1321-1326, 1998.
HODGINS, J. K. Tree-Dimensional Human Running. IEEE International Conference on Robotics and Automation, Minneapolis, April, v.4, pp.3271-3276, 1996.
WILTGEN, F. Protótipos e Prototipagem Rápida Aditiva sua Importância no Auxílio do Desenvolvimento Científico e Tecnológico. 10° Congresso Brasileiro de Engenharia de Fabricação COBEF 2019, UFSCar, São Carlos-SP, 5 a 7 agosto, 2019.
WILTGEN, F. Técnica de Ensaios de Sistemas Complexos com Metodologia de Engenharia de Sistemas & Requisitos. Interfaces Científicas - Exatas e Tecnológicas, v.4(01), pp.51-60, 2020A.
WILTGEN, F. Projetos Baseados em Requisitos. Brazilian Journal Technology, Curitiba, aceito para publicação em edição de texto, pp.1-17, 2020B.
WILTGEN, F. Protótipos são Importantes. 11° Congresso Brasileiro de Engenharia de Fabricação COBEF 2021, Curitiba, a ser realizado em 24 a 26 maio, pp.1-9, 2021.
LOUCOPOULOS, P.; KARAKOSTAS, V. System Requirements Engineering. McGraw-Hill, 1995. 160p.
KOTONYA, G.; SOMMERVILLE, I. Requirements Engineering: Process and Techniques. John Wiley and Sons. 1998. 294p.
EL SHEIMY, N.; YOUSSEF, A. Inertial Sensors Technologies for Navigation Applications: State of The Art and Future Trends. Satellit Navigation, v.1(02), pp.1-21, 2020.
FUJITA, H. A Decade of Mems and its Future. IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems, Investigation of Micro Structures, Sensors, Actuators, Machines and Robots, Nagoya, 26-30 Jan., pp.1-8, 1997.
YANG, C. C.; HSU, Y. L. A Review of Accelerometry-Based Wearable Motion Detectors for Physical Activity Monitoring. Sensors, v.10(08), pp.7772-7788, 2010.
DAMIANOS, D.; GIRARDIN, G. High-End Inertial Sensors for Defense, Aerospace and Industrial Applications 2020. Yole Dèveloppement Market & Technology Report, August, 2020. 5p.
DADAFSHAR, M. Maxin Integrated, Accelerometer and Gyroscopes Sensors: Operation, Sensing and Application. Application Note 5830, Maxim Integrated Products, 2014. 11p.
ROCHA, F. S.; MARRANGHELLO, G. F. Propriedades de um Acelerômetro Eletrônico e Possibilidades de uso no Ensino de Mecânica. Latin-American Journal of Physics Education. v.7(01), pp.37-46, 2013.
OLIVEIRA, E. J. L.; SILVA, F. R.; WILTGEN, F. (BARBOSA, L. F. W.) Dispositivo Inercial Baseado em Giroscópio para Aplicação em Robótica. XII Encontro Latino Americano de Iniciação Científica e VIII Encontro Latino Americano de Pós-Graduação na Universidade do Vale do Paraíba, pp.1-4, 2008.
FERREIRA, A. H. R. Análise Eletromecânica do Giroscópio MEMS. Dissertação de Mestrado Universidade Estadual de Campinas, 2013. 151p.
USUBAMATOV, P. A Mathematical Model for Motions of Gyroscope. Cogent Engineering, v.3, pp.1-15, 2016.
TRIPATHI, V.; GUPTA, R. Self-Stabilizing Platform Using MPU 6050 – a Boon for The Society To Reduce Accidental Death. International Journal of Engineering and Advanced Technology, v.8(04), pp.254-257, 2019.
FAISAL, I. A.; PURBOYO, T. W.; ANSORI. A. A Review of Accelerometer Sensor and Gyroscope Sensor in IMU Sensors on Motion Capture. Journal of Engineering and Applied Sciences, v.15(3), pp.826-829, 2019.
INCOSE Systems Engineering Handbook: A Guide for System Life Cycle Processes and Activities (INCOSE-TP-2003-002-04). Version 4, Wiley, 2015. 304p.
NASA Nasa Systems Engineering Handbook. Revision 2 SP-6105, 2018. 298p.
DoD System Engineering Fundamentals (Department of Defense – DoD 22060-5565). Defense Acquisition University Press Fort Belvoir, Virginia, 2001. 223p.
SAUSER, B. J.; GOVE, R.; FORBES, E.; RAMIREZ-MARQUEZ, J. E. Integration Maturity Metrics: Development of an Integration Readiness Level. Information Knowledge Systems Management, Amsterdam, v.9(01), pp.17-46, 2010.
MANKINS, J. C. Technology Readiness Assessments: A Retrospective. Acta Astronautica, Amsterdam, v.65(09-10), pp.1216-1223, 2009.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Revista Tecnologia
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Opinions expressed in the paper on of their texts, agree that Revista Tecnologia will have the right to disseminate them through print and electronic media. RT reserves the right to make, in the originals, normative, spelling and grammatical changes, with a view to maintaining the cultured standard of the language, respecting, however, the style of the authors.
